Can the FC-8600T face recognition access controller use your cloud system? How to set it up to communicate with the cloud system? How to send photos?
Hello, welcome to use our products, thank you for your support. The FC-8600T face recognition access controller can be managed through the cloud system, first of all, we must ensure that the FC-8600T face recognition access controller is connected to the external network, in the ‘Access Control’ menu of the ‘Access Control’ module of the cloud platform, click on ‘Install’ (with photos), and use the ‘Setting Tool’ on the installation interface to complete the settings of the server address and port of the face recognition access controller (with photos), after the setting is complete, return to the installation interface, enter the 16-bit sn code of the device, click ‘OK’, modify the corresponding parameters, and click ‘install’ to complete the installation.
In the ‘Personnel Information’ menu in the ‘Personnel’ module, click on ‘Add’ (pictured) to edit the entered personnel information and avatar information. After the entry is completed, click on ‘OK’ to complete the addition of the personnel file.
Finally, in the ‘Authorization’ menu in the ‘Access Control’ module, select the person who needs to authorize the face recognition access level to the right frame and click on ‘Next’
Select the door device that needs authorization (access controller, face recognition access controller, fingerprint recognition access controller, etc.), after selecting, click "Allow selected personnel to pass through the selected door", wait for about one minute, and upload is successful.
